Cuplock System0.5m – 3.0m
MS Cuplock Vertical
Vertical standard with a welded bottom cup and captive top cup for rigid four-way connections. Spigot-jointed for any height.
Enquire nowProduct Catalogue
Everything your site needs, in one place.
From cuplock systems and adjustable props to shuttering, jacks, fittings and on-site machinery — a complete range of M.S. scaffolding and formwork, manufactured to Indian standards and available for rental or outright purchase.
Conforming to IS 1239 / 1161 standards
46+
Products in stock
10
Product families
IS
Certified materials
Showing 46 products
Cuplock System0.6m – 2.5m
MS Cuplock Ledger
Horizontal ledger with forged blade ends that lock into the cuplock joint — fast, secure and tool-free assembly.
Enquire nowCuplock SystemTop & bottom cup
Cuplock Top & Bottom Cup
Welded bottom cup and captive top cup with ledger blade — the locking joint at the heart of the cuplock system.
Enquire nowProps & Spans1.5m – 4.8m
MS Props
Adjustable steel props for slab and beam support. Telescopic with pin-and-nut height locking.
Enquire nowProps & SpansAdjustable
MS Acro Span
Adjustable telescopic lattice span that carries slab loads across wide, prop-free openings.
Enquire nowProps & SpansFixed length
MS Fix Span
Fixed-length span beam for repetitive formwork bays where the opening is a standard size.
Enquire nowProps & SpansPerforated
MS Acro Bridge Plate
Perforated bridging plate that links spans and props into a continuous slab-support deck.
Enquire nowShuttering & FormworkVarious
MS Soldier
Soldier walers that stiffen and align column and wall shutters against concrete pressure.
Enquire nowShuttering & FormworkCustom
MS Boiler
Channel-section steel shuttering for boiler and beam casting — stacked and crated for transport.
Enquire nowShuttering & FormworkCircular
MS Pharma
Curved, semi-circular column formwork plates for clean circular concrete columns.
Enquire nowShuttering & Formwork9 / 12 / 18 mm
Shuttering Plywood
Phenol-bonded BWP-grade film-faced shuttering ply for beams, columns, slabs and walls.
Enquire nowShuttering & Formwork8×4 ft
Silver Wood Plywood
Silverwood shuttering plywood — durable, water-resistant panels that give a smooth concrete finish.
Enquire nowFormwork AccessoriesHigh-tensile
Tie Rods
High-tensile formwork tie rods that hold wall shutters together against concrete pressure.
Enquire nowFormwork AccessoriesWith water bar
Water Stopper Tie Rod
Tie rod with a central water-stop plate for water-retaining and basement walls.
Enquire nowFormwork AccessoriesCast steel
Wing Nut
Formwork wing nut that tightens onto tie rods to clamp wall shutters securely.
Enquire nowFormwork AccessoriesWith plate
Anchor Wing Nut
Anchor wing nut with a bearing plate that anchors tie rods to soldiers and walers.
Enquire nowFormwork AccessoriesWith handle
Prop Sleeve Nut
Adjusting sleeve nut with handle for fine height control of adjustable steel props.
Enquire nowFormwork AccessoriesWith tie rod
PVC Cone
PVC cone used with tie rods to form a recess and protect the rod in concrete walls.
Enquire nowFormwork AccessoriesThreaded
Anchor Nut
Threaded anchor nut that secures formwork tie rods to soldiers and walers.
Enquire nowFormwork AccessoriesL&T type
Prop Nut
L&T-type prop nut for locking and fine-adjusting the height of adjustable steel props.
Enquire nowFrames & Access2m × 1m
MS H Frame & X-Bracing
H-frame with cross (X) bracing for rapid tower scaffolding and shoring. Standard module that gives lateral stability.
Enquire nowFrames & AccessCustom
MS Falli (Jalli)
Welded grating / ladder panel used as access and walkway grating on scaffolds.
Enquire nowJacksAdjustable
MS Base Jack
Adjustable base-plate jack that levels scaffolding and props on uneven ground.
Enquire nowJacksAdjustable
MS U Jack
U-head screw jack that cradles spans and beams while allowing fine height adjustment.
Enquire nowMaterial HandlingPneumatic tyre
MS Trolley Wheel Barrow
Single-wheel barrow with a pneumatic tyre for concrete, sand and aggregate.
Enquire nowMaterial HandlingWith handles
MS Tray
Steel carrying tray with side handles for mortar, concrete and debris.
Enquire nowFittings & AccessoriesForged & Pressed
Couplers & Clamps
Full range of forged and pressed steel clamps — fixed, swivel, single, sleeve, putlog and beam couplers.
Enquire nowFittings & AccessoriesForged
Swivel Coupler
Forged swivel coupler that connects two scaffold tubes at any angle for braces and diagonals.
Enquire nowFittings & AccessoriesPressed steel
Single Coupler
Pressed single coupler for fixing transoms, putlogs and guardrails to ledgers.
Enquire nowFittings & AccessoriesGalvanized
Putlog Coupler
Galvanized putlog coupler that secures putlog tubes and boards onto the scaffold.
Enquire nowFittings & AccessoriesRubber-lined
Sleeve Coupler
Pressed sleeve coupler with rubber lining that joins two tubes end-to-end in a continuous run.
Enquire nowFittings & AccessoriesExternal
External Sleeve Coupler
External sleeve coupler that joins two tube ends over the outside of the tube for a flush, continuous run.
Enquire nowFittings & AccessoriesBeam fixing
Girder / Beam Coupler
Girder coupler used in pairs to hang or support scaffold tubes from steel beams and girders.
Enquire nowFittings & AccessoriesGalvanized
Board Retaining Coupler
Holds scaffold boards down at their ends to prevent tipping and wind uplift.
Enquire nowFittings & AccessoriesAdjustable
Toe Board Clamp
Clamp that holds the toe board in place along the working-platform edge for fall protection.
Enquire nowFittings & AccessoriesInternal
Internal Joint Pin
Internal expanding joint pin that connects two tubes end-to-end from the inside.
Enquire nowFittings & AccessoriesFixed
Base Plate
Fixed steel base plate that spreads scaffold standard loads onto the ground or sole board.
Enquire nowFittings & AccessoriesForged, right-angle
Forged Double Coupler
Forged right-angle (fixed) coupler that joins two tubes at 90° for load-bearing connections.
Enquire nowFittings & AccessoriesHeavy-duty
Box Clamp
Heavy box clamp that connects two parallel scaffold tubes for strong, rigid connections.
Enquire nowFittings & AccessoriesGalvanized
Ladder Clamp
Clamp that secures access ladders firmly to the scaffold tube for safe climbing.
Enquire nowFittings & Accessories2 / 3 / 4 ft
MS Shikanja
Adjustable clamping device for holding shutters and members tight during casting.
Enquire nowRaw MaterialVarious sizes
MS Square Tube
M.S. square hollow sections for fabrication, frames and bracing — supplied and cut to length.
Enquire nowConstruction MachinesUp to 42 mm
Bar Bending Machine
Automatic steel bar bender with angle and auto / manual conversion for fast rebar work.
Enquire nowConstruction MachinesOn-site
Bar Threading Machine
Bar cutting & threading machine for fast, accurate rebar preparation on site.
Enquire nowConstruction MachinesHeavy-duty
Cutting & Hand Cutter Machine
Chop-saw cutting machine and hand cutter for steel, tube and tile cutting.
Enquire nowConstruction Machines850 W
Angle Grinder Machine
850 W angle grinder supplied with a cutting, grinding and polishing accessory kit.
Enquire now